Page 1 of 1

Local Server: update fails - solution

Posted: Sun Aug 26, 2018 1:17 pm
by Seajiha
As illarion is now using https the ~/update command will most likely fail. To fix it you must do the following *once*:

1) Log into your local server with putty
2) Write and submit: sudo nano /etc/apt/sources.list.d/illarion.list
3) A text editor will open, with text only on the first line. In front of all text on this line place a #
4) Save and close the file (Ctrl-X, press J then and then enter)
5) Write and submit: sudo apt-get update
6) Write and submit: sudo apt-get install apt-transport-https
7) Confirm the question if installing is okay with: J
8 ) Write and submit: sudo nano /etc/apt/sources.list.d/illarion.list
9) Remove the leading # that you have just added, save and quit again using Ctrl-X, J, enter
10) Write and submit: sudo apt-get update

11) Update your local server as usual with ~/update